Emulzer DDM 2K
Dilatation filling paste
It is a double-component, polyurethane-bitumen-based, cold-applied, self-leveling and joint filler with high mechanical and chemical strength.
It is used for waterproofing and filling horizontal dynamic dilatations and joints.
It is elastic. It maintains the elasticity between -20 ° C and + 120 ° C.
It is a cold-applied material.
It is resistant to abrasion.
As a self-leveling material, it is easily and quickly.
It has very high adherence
The surface should be clean and dry.
The joints can be brushed, spiral engine or sandblasting.
If possible joint spacing must be treated.
DDM 2K applied onto damp surfaces results in foaming.
It is used only on horizontal joints.
All the hardener contained in the small pail is mixed with all the main material contained in the big pail by using a low speed mixer until it becomes homogenous
The mixture has to be consumed within 30 minutes.
Otherwise, it cannot be recovered.
After the application the surface must be protected from water exposure for at least 6-8 hours.